24/7 mold response (844) 352-3560
IICRC Certified FirmLicensed WA General Contractor4.9 stars, 110 reviewsSame-day & 24/7 responseWe bill your insuranceFree estimates

Town and Country, Washington

Mold Removal and Remediation Service in Town and Country, WA

Our IICRC-certified crew finds the moisture, contains the area, and removes mold in Town and Country. Same-day response, we bill your insurance.

IICRC certifiedSame-day responseWe bill insuranceFree estimates
Black mold spreading down an interior wall in a Town and Country, Washington home

If you see mold right now

Three things to do while you wait

Stop the moisture

Shut off any active leak and wipe up standing water. Mold needs moisture to spread, so cutting the water source first slows it down.

Keep the area closed

Avoid disturbing or scrubbing heavy growth. Close doors to the room so spores are not spread through the rest of the home.

Call our 24/7 line

Reach our team any hour at (844) 352-3560. We will talk you through the next steps and set a same-day visit when needed.

Reviews

Rated 4.9 by Town and Country-area neighbors

4.9
from 110 reviews

Thorough inspection and a fair quote. They explained the lab results in plain words and never pushed anything on us.

Elena Rourke
Town and Country, WA · August 8, 2023

Detailed before and after photos of the mold removal. You can tell they take pride in their work.

Ophelia Ashby
Mead, WA · August 25, 2020

Good mold removal work overall. Scheduling took a few days longer than expected but the result was worth it.

Persephone Calloway
Mead, WA · September 4, 2025

Our process

Our mold removal process in Town and Country, WA

Inspect

We locate the mold and the moisture feeding it using meters and, where useful, testing.

Contain

We seal the work area with plastic sheeting and run HEPA air scrubbers under negative air.

Remove

We take out moldy material, HEPA vacuum, and clean surfaces with proven methods.

Dry

We dry the structure with commercial dehumidifiers until moisture readings return to normal.

Verify

We recheck the space and can arrange clearance testing so you know the job is done.

Why Town and Country homeowners call us

IICRC-certified mold removal near Town and Country

IICRC-certified crew

Our technicians follow the IICRC S520 standard for mold remediation, so the work in Town and Country meets a recognized industry benchmark.

We bill your insurance

Insurance is accepted and we bill your carrier directly, handling the photos and paperwork that keep a claim moving.

Same-day, open 24/7

Mold does not wait. Call any hour and we can often reach a Town and Country home the same day.

Local since 2014

We are based in Mead, minutes from Town and Country, and we know Washington homes from finished basements to crawl spaces.

Where we work in Town and Country

Town and Country neighborhoods we cover

We cover Town and Country and the surrounding Spokane County streets, drying out water damage before mold has a chance to take hold.

Country HomesHillyardDartfordSpokaneMillwoodSpokane ValleyAirway HeightsGreen Bluff
See our full service area

What it costs

Mold removal cost in Town and Country, WA

Every home is different, so here are the typical Washington ranges we see. These are planning numbers, not a quote. What you pay depends on how much mold there is, where it is, and what caused it.

Small area
$500 to $1,500

A single moldy spot, a closet, or under a sink. We contain it, remove it, and treat the surface.

One room
$1,500 to $3,500

A bathroom, kitchen, or bedroom with mold on a wall or ceiling, plus the moisture source fixed.

Basement, attic, or crawl space
$2,000 to $6,000

Larger areas that need more containment and drying. Common here after spring rain or a slow leak.

Whole-house or severe
$10,000 and up

Mold across several rooms or after major water damage. We work in phases, room by room.

We give free estimates, so the surest way to know your number is to call and let us walk the space with you. Want a ballpark first? Try our instant mold remediation cost calculator. Filing a claim? We bill your carrier directly, so see our mold insurance claims guide.

On the job

Mold remediation work near Town and Country

Local knowledge

Why Town and Country homes get mold

Mold in Town and Country rarely announces itself. It starts where Washington moisture collects, in basements, crawl spaces, and behind bathroom tile, and spreads before anyone sees it.

The trigger is almost always moisture, whether from condensation, a hidden leak, or groundwater after a wet spell. Left alone, mold moves from one damp surface to the next.

Our crew inspects Town and Country homes, contains the affected area under negative air, removes the mold, and dries the structure until readings return to normal.

  • Air conditioning condensation feeding mold on cool basement and closet walls
  • Plumbing leaks and poor ventilation that let damp air linger and mold spread
  • Heavy rain and seasonal flooding pushing water toward foundations and crawl spaces
  • Roof and plumbing leaks in Town and Country homes that feed hidden mold for months before anyone notices

If your Town and Country home has a radon mitigation system, the fans and pipes often sit right where basement mold begins. We work carefully around them so we clear the mold without disturbing your setup.

Whatever started it, we find the moisture source first, because mold always returns if the water problem is left behind. Our methods follow public guidance from the EPA and the CDC on handling indoor mold safely.

Certified & trusted

Standards we work to, carriers we bill

Better Business Bureau accredited
United States Environmental Protection Agency
State Farm insurance accepted
Allstate insurance accepted
American Family Insurance accepted

Good to know

Mold removal in Town and Country, WA: common questions

What causes mold in Town and Country homes?

Almost always moisture: humidity, a hidden leak, or water pushed toward the foundation after heavy rain. We find and fix the source, not just the surface.

Do you bill insurance for mold work in Town and Country?

Yes. We bill your carrier directly and document the loss with photos and moisture readings, which keeps a Town and Country claim moving.

Is the mold in my Town and Country home dangerous?

Any mold can affect indoor air, so it should be handled with care. We contain the area and follow EPA and CDC guidance to remove it safely.

Do you serve all of Town and Country?

Yes. We cover Town and Country and the surrounding Spokane County area, and we can usually reach your home the same day you call.

Talk to a certified team now

Found mold in Town and Country, WA?

Call our 24/7 line and talk to the certified crew directly. Same-day response, we bill your insurance, and free estimates.